Cite as [A.S.A.C. § 25.0119]
A hot water tank, with suitable heating facilities, of not less than 30 gallons capacity, shall be installed; hot water and cold water shall be piped to the wash sink and freezer location; enough hose shall be provided to run water into the freezer; after the freezer and parts have been thoroughly washed, they shall be assembled and subjected to a heat treatment at a temperature of not less than 180 degrees Fahrenheit for 2 minutes; provided, that nothing contained in this section shall be constructed as disbarring any other process which has been demonstrated as of at least equal efficiency and is approved by the director of health. A 2-compartment metal wash sink of sufficient size to accommodate the largest piece of equipment shall be provided so that the equipment may be submerged in hot water for washing purposes.History: Pub. Health Reg. 2, eff 7 Jan 64, Part 2 § 2.